Content

  1. How to choose
  2. Rating of the best manicure machines for 2020
  3. Conclusion

The best manicure machines for 2020

The best manicure machines for 2020

A woman's hands are as important as her face or figure. Previously, hands were kissed, but now they are carefully examined. Well-groomed hands are able to captivate and attract, leaving the most pleasant impression on you. Manicure plays an important role in this. Someone decides the issue of manicure by going to the salon, while for others it is important to do this caring procedure for themselves. Our article is intended for the second category of ladies. In it, we have compiled a rating of the best manicure machines for 2020.

How to choose

Before purchasing a device, the buyer must define for himself the criteria for choosing a product, and this is easiest to do based on your experience in manicure. If you are a beginner who decided to purchase nail equipment for the first time, then choose simplified models, where the speed of cutters reaches 20-25 thousand revolutions per minute, and the ceramic nozzles themselves are no more than 7 pieces. If you already have experience with hardware manicure, then a 60W technique is perfect for you. Choose equipment that produces 35-40 thousand revolutions per minute, with it you can do not only manicure, but also pedicure. For professionals who work in salons or serve customers at home, the most powerful devices with a power of up to 100 watts are suitable. This technique has all the necessary functions and is often equipped with a decent number of attachments.

Types of devices

In fact, all manicure machines can be divided into a couple of categories: for home and professional manicure. The first type of equipment is notable for its low cost. The devices are compact and safe. They can function both from batteries and from the built-in accumulator.

The second type of equipment has high power, a wide selection of attachments, is equipped with overheating protection and may have additional functions, such as a built-in vacuum cleaner for removing dust.

Top manufacturers

There are many manufacturers on the market for manicure hardware devices, but Polaris, Scholl, Rowenta, Beurer, Strong are considered to be of the highest quality. Also popular are the South Korean brand Saeyang Microtech and our young makers Magic Bits, Irisk and Vitek.

Rating of the best manicure machines for 2020

Strong 210-105 L

The Korean device Strong 210-105 L has a rotation speed of up to 35 thousand revolutions per minute. It is convenient to work with the equipment, because there are holders for cutters and it is possible to change them within 3 seconds, while the fixation will be at a height. Strong 210-105 L is equipped with overload protection and built-in cooling. Due to the absence of vibration, a high-quality and even manicure is obtained. The technique is designed for 12 consecutive hours. The ventilation slots are located on the back of the handle, so the interior of the device is protected from dust, which means it will last longer. The device painlessly and accurately files the nail plates, removes gel polish with high quality, perfectly polishes the nail and helps to get rid of dry cuticles. It is sold in two trim levels: with and without a pedal. Power 64 watts.

You can purchase from 10,500 rubles.

Strong 210-105 L
Advantages:
  • High-quality equipment;
  • Powerful and compact;
  • There is no vibration;
  • Doesn't heat up, low noise;
  • There is an option with a pedal;
  • Build and Durability;
  • According to buyers one of the best.
Disadvantages:
  • Counterfeits are often sold;
  • High price.

Marathon 3 Champion SH20N

The Korean Marathon 3 Champion SH20N is a universal milling cutter for manicure and pedicure. It comes in three colors: white, blue and pink. The build quality and components are high. The package includes a plastic handle stand, spare parts and an instruction manual. Several configuration options are offered: without pedal with handpiece and with pedal and handpiece. Different revolutions are also offered. Rotation speed from 28 thousand to 40 thousand revolutions per minute. The control unit itself has a pleasant, streamlined shape; there is a shaft rotation speed regulator on the front panel. Above is an indicator light. The attachments from the equipment are installed in a rotary collet clamp. Due to the constant cooling of the handle, damage is not allowed. Power - 45 W, power type: mains.

You can purchase from 7,000 rubles.

НMarathon 3 Champion SH20N
Advantages:
  • Robust body;
  • Smooth speed control;
  • One year warranty for the control unit;
  • Handle with automatic engine cooling;
  • Compact and quiet;
  • Does not vibrate or heat up.
Disadvantages:
  • Requires frequent wiping due to rapid dusting.
  • Not everyone likes the price.

Gezatone 130D

Gezatone 130D set allows you to do salon treatments at home. The device itself is coated with a sapphire coating, which allows it to be durable. Thanks to the ergonomic handle and touch control, nail treatments are carried out with maximum comfort. The set includes 7 high quality replaceable attachments, they do not transform when used. The nozzle has 10 rotation modes. There is an LED flashlight that illuminates the smallest details that need to be processed. The device is great for beginners, since you don't need to have any special skills, you just need to follow the instructions and everything will work out. The device operates from the mains, there is an on and off button. There is a possibility to regulate the power of revolutions.

Cost: about 3000 rubles.

Gezatone 130D
Advantages:
  • Suitable for beginners;
  • Accessible and understandable;
  • Good rotation speed;
  • The necessary set of nozzles;
  • There is a case for storing the device and attachments.
Disadvantages:
  • No battery operation possible.

Irisk JD-400

The almost professional Irisk JD-400 will be a gorgeous gift for your beloved. The machine is multifunctional, with its help manicure and pedicure are perfectly done. The diamond attachment flawlessly cares for the lateral ridges and cuticles. The rotation speed of the device is 25 thousand revolutions per minute, the power is 35 W. The country of origin is China, so you can try to order from Ali Express, it may be more profitable than the prices from dealers. The device is small in size, compact, and can be carried with you if you wish. There is no rattling or vibration during operation. A special stand is provided for the handle with attachments. The handle itself fits comfortably in the hand, and the attachments are easy to change. The device settings are sensitive and perfectly adapt to their owner. The weight is small, about one and a half kg.

You can buy it for 4800 rubles.

Irisk JD-400
Advantages:
  • Affordable cost for such a device;
  • Control buttons are located on the front of the body;
  • There is a built-in fan;
  • There are cutters and a stand;
  • Compactness and light weight.
Disadvantages:
  • Cutters without abrasiveness designation.

Nail Drill 30000 15W

According to buyers, the Nail Drill 30,000 15W has proven itself well. This device is also called a nail drill. It is used for manicure, pedicure, removing gel polish, removing cuticles, processing rollers and for sanding the surface of the nail. The set includes cutters designed for working with dry calluses.Additional cutters and attachments can be easily removed and simply attached to the handle. A stable stand is included. Rotation speed up to 30 thousand rpm. The handle on the front pedal of the device provides a smooth change of speeds. Does not vibrate during operation, noise is at a minimum. Built-in fuse and cooling holes. Most importantly, the manicure drill does not heat up during operation, so you do not have to worry about burning your fingers.

You can buy it for 5000 rubles.

Nail Drill 30000 15W
Advantages:
  • Quiet in operation;
  • There is no vibration;
  • The package includes 6 cutters;
  • In addition to manual, there is a foot control;
  • Excellent cooling system;
  • Does not heat up during operation;
  • Comfortable handle.
Disadvantages:
  • Brittle plastic.

Magic Bits Mini

Magic Bits Mini is great for home use. The package includes a handle, a control unit on the wire, a power supply and a set of brand cutters. Rotation speed from 500 to 20 thousand rpm. There is a reverse and a speed regulator. The device itself consists of a handle and a wire. During operation, the device does not vibrate, does not emit loud sounds and does not heat up. Special attention should be paid to the cutters included in the set. Often, for beginners, they put a low-quality product, here everything is done at the highest level. A total of 4 cutters: a medium abrasive diamond fissure, a diamond cylinder, a medium abrasive diamond ball and a 6 mm Standard corundum ball. The manufacturer recommends using the device in a clean and dry environment, as moisture and dust will damage the device. Works from the network.

You can buy it for 2500 rubles.

Magic Bits Mini
Advantages:
  • Suitable for beginners;
  • High quality cutters;
  • Easy to use;
  • There is a reverse and a speed regulator;
  • Secure attachment of the cutter.
Disadvantages:
  • Short cord;
  • Professionals are encouraged to walk by.

Beurer MP62

The Beurer MP62 manicure and pedicure set is able to please any lady who wants to get flawless nails at home. During operation, a bright LED lamp turns on. The package includes 10 safe, removable attachments. If you accidentally press hard, the device turns off. Such a wonderful function helps to protect the dermis from possible damage. The presence of smooth adjustment allows you to independently set the speed of the device. A protective cap helps against nail dust, which inevitably accumulates during manicure. High quality ear tips are made of sapphire, which is suitable for people who suffer from diabetes. The coarse-grained sapphire cone allows you to efficiently and painlessly remove large calluses or horny skin. The sandpaper coated nozzle also fights this remarkably well. A miniature bag is attached to the technique, where you can store the device and attachments. During operation, the structure practically does not make noise.

Set cost: about 5000 rubles.

Beurer MP62
Advantages:
  • Sapphire coated tips;
  • High quality of the device;
  • There is an LED lamp;
  • Storage bag included;
  • Copes well with any skin and nails;
  • Affordable price.
Disadvantages:
  • Not found.

PLANET NAILS ORBITA “SMART”

According to buyers' opinion, the PLANET NAILS ORBITA “SMART” set is the best complete set. The device provides an excellent quality of processing both nails and the skin around them. PLANET NAILS ORBITA “SMART” will work well for both normal and artificial nails. The technique is ideal for dealing with rough skin and calluses. It is quite easy to insert and remove attachments. A bonus is the built-in touch pen holder, the weight of the pen itself is 200 grams. When the handle is located on the sensor holder, the device turns off, and as soon as you lift it from it, the work resumes. The power of the equipment is 60 W. The rotation frequency is 35 thousand revolutions per minute. A liquid crystal digital display is located on the body of the device, which displays all the necessary data of the current process. The device comes with 6 cutters for various operations.

You can buy PLANET NAILS ORBITA “SMART” for 10 thousand rubles.

PLANET NAILS ORBITA “SMART
Advantages:
  • Multifunctional equipment;
  • Will please both beginners and professionals;
  • The presence of a digital display;
  • There is a collet for the cutter;
  • There is a touch-sensitive pen holder;
  • Quality cutters.
Disadvantages:
  • High price;
  • Not suitable for a large flow of clients.

TNL MP-68

A decent budget option is the TNL MP-68. This machine is perfect for manicure or pedicure, and also performs high-quality correction of artificial nails. The device removes the cuticle well, performs grinding at different levels, processes the nail plate. The ergonomic handle is very comfortable and adjusts the speed well. No vibration, minimal noise. Ideal for home use as the cord is long and the handle is lightweight. Also included is a pedal to make the TNL MP-68 easier to use. The package includes 4 cutters: an analog of a cutter, a bullet for cleaning under the cuticle (and for rollers), a foot grinder, a cutter for processing feet and an analog of a flame cutter for raising the cuticle. The attachments are easy to replace and securely attached. Power is 21 W, voltage is 220 W, rotation speed reaches 35 thousand revolutions per minute. The manufacturer issues a six months warranty.

You can buy it for 4500 rubles.

TNL MP-68
Advantages:
  • The structure does not vibrate during operation;
  • With a pedal;
  • High rpm;
  • Excellent set of cutters;
  • No vibration, noise at a minimum;
  • Comfortable handle.
Disadvantages:
  • No overheating protection.

ruNail PM-25000

The ruNail PM-25000 device has proven itself so well that it is used not only at home, but also in salons. The package includes a device block, a handle, a set of cutters, a pedal, a handle stand, a technical passport and a 3-month warranty card. The device operates from the mains, the motor makes 25 thousand revolutions per minute. The working handle itself is removable; you need to connect it to the connector on the case. This is very convenient, since if the handle suddenly breaks, it will not be necessary to change the entire technique. The cutters are easy to change thanks to the swivel mechanism on the handle. If suddenly you are not satisfied with the cutters from the manufacturer, then you can buy others, the technique works without problems with any. The device is distinguished by increased stability and decent weight.

You can buy it for 4000 rubles.

ruNail PM-25000
Advantages:
  • With pedal and micromotor stand;
  • The sound during operation is muffled;
  • Two mode switches: foot and manual;
  • High reliability;
  • The handle can be replaced if necessary.
Disadvantages:
  • Heats up during operation;
  • There are complaints about the smell of plastic.

Conclusion

Before purchasing a manicure machine, you need to have at least minimal communication skills so that you do not “kill” your nails in the process. So, if you are a beginner, it will be useful to take courses and watch some videos on YouTube. To begin with, of course, give preference to the budget version of the technique with the necessary functionality, but a skill in manicure? you can already purchase more professional devices. You will quickly recoup your purchase, since one trip to the salon costs at least 1000 rubles. So a few months of use and you will benefit. With such a technique, you don't have to worry that your pens will be unkempt, now you can always be fully armed, and who knows, maybe a manicure machine will be a good help to earn money, because beautiful nails are always relevant.

Computers

Sport

beauty