Rating of the best anti-corrosion agents for cars in 2020

A car is not just a means of transportation, but an iron friend. In it, you can wait out a quarrel with your wife or just be alone, go to another city. But while the owner spends the rest of the time under the roof of his house, the car resignedly bears the external influence.

Reagents and climatic conditions eventually leave marks on the body and other parts of the vehicle. The coating applied by the manufacturer will not save from rust. It will slowly disappear even with the most careful car operation. To stop the appearance of corrosion, a special protective agent called "anticorrosive" is called upon.

Description and characteristics of the tool

Most of the transport is processed with mastic in the factory. It will do the job well with perfect adhesion to metal surfaces. Only unstable weather conditions and the peculiarities of car operation greatly reduce the level of adhesion.

Therefore, you need to use an anti-corrosion agent that is applied to the areas most susceptible to rust. These are the bottom, body, wheel arches. After application, the soluble components evaporate, and a solid film forms on the surface.

Antirust becomes a barrier between car parts and the external environment. It slows down oxidative processes, and does not cure corrosion and does not change the structure of the metal. To treat an already damaged area with a product is useless.

Funds can be divided into two main groups, depending on the type of base:

• bituminous;
• based on different types of wax.

The best manufacturers are trying to improve anticorrosive, so they use additives. The latter are designed to make the material more effective, to increase its strength. Anticorrosive compounds with rubber, rubber and plastic additives were added to popular models.

A car anti-corrosion agent is used to:

• save money, because the price of the substance will be cheaper than body repair;
• increase the service life of individual vehicle parts.

Advantages and disadvantages

To benefit from using an anticorrosive agent, you need to know how to select and apply a product. Efficiency is also determined by the brand and quality of the surface preparation. If all conditions are met, the product will reliably protect the car from rust and external mechanical damage.

With the help of anticorrosive, it will be possible to extend the life of the vehicle for several years, slowing down the process of natural wear of the metal.Moreover, every car owner should not forget about three things:

1. After covering the car body with anticorrosive material, do not lay the noise insulation. Therefore, you will have to choose one thing - either soundproofing, or anticorrosive. The only way out is to look for a means that absorbs the noise.
2. A pungent unpleasant odor is one of the properties of an anti-corrosion agent. It will disappear only after a few days.
3. It contains complex chemicals. Therefore, the application technology must be followed without the slightest change. Otherwise, the desired effect will not be achieved.

The main advantage of an anti-corrosion agent is hydrophobicity. It repels water, preventing moisture from staying on the surface of the car after washing or rain.

Classification of funds

Which one is better to buy anticorrosive is a question that torments all vehicle owners, both beginners and experienced ones. The assortment presented on the shelves of specialized stores can be divided into several categories. The material is classified according to the place of application: there are means for hidden parts and the outer surface.

Anticorrosive substances differ in chemical composition for such types as:

• bituminous mastics, which are made from synthetic resins. Their purpose is to prevent gravel and stones from scratching the surface. The applied layer thickness is 250-400 micrometers;
• based on polyvinyl chloride and rubber. These are the best remedies commonly used by car manufacturers. They are ideal for the underbody as they have high adhesion, increased durability and perfectly withstand any temperature extremes. The funds have only one drawback - without skill and special equipment, it is extremely difficult to apply them;
• oil-based, which actively penetrate pores and cracks. They remain liquid throughout the entire service life;
• with paraffin and wax, which have demonstrated excellent resistance to temperature changes. After application, the material forms an elastic film that prevents corrosion.

As an additional tool, you can use liquid plastic. But you cannot completely rely on it, since the material is not durable and not reliable. If you need an anticorrosive with high adhesion, you should pay attention to a rubber agent.

The difference between oily and paraffinic agents is that the former provide good protection for moving parts and hard-to-reach surfaces. The second type of material will dry out and crumble as it moves.

Popular products also include slate, made from bituminous and synthetic resins with the addition of a natural filler. The advantage of anticorrosive is its high strength, so the coating is not afraid of mechanical stress. The product can be used to treat the underbody and wheel arches.

Selection criteria and requirements for funds

Before deciding which anticorrosive company is better, you should understand what requirements it must meet. Although the assortment is subdivided into groups, each substance must have such properties as:

• high adhesion to the car surface;
• perfect filling of hard-to-reach places and chips;
• hydrophobicity;
• creating a uniform coating for a long time.

Factory processing will last two to three years. During this period, it will not lose its physical properties and will reliably protect the car.

When choosing an anticorrosive treatment for the underbody, it is important to remember about grip and elasticity indicators. The tool did not appear to crack and collapse due to the impacts of rubble, which flies out from under the wheels of passing cars. The anti-gravel coating will protect various body elements from chips and scratches.

Rating of high-quality and popular anti-corrosion agents for cars in 2020

According to buyers, it is better to give preference to products from foreign manufacturers. But there are means of domestic production that are not inferior in quality to foreign counterparts. The rating includes both inexpensive products and premium formulations for hidden surfaces and external processing.The popularity of the models is ensured by price, quality and composition.

Dinitrol is an expensive but convenient self-application

The company has been producing a variety of car protection products since the distant 1939. Although the products are expensive, they are effective. Numerous consumer reviews confirm this.

In the assortment, you can find a tool for each part of the vehicle. The manufacturer produces anticorrosive materials even for the passenger compartment, muffler and engine compartment. Dinitrol products have won the hearts of car owners for their high quality. They are manufactured with powerful inhibitors, polyurethane adhesives, anti-gravel additives and anti-corrosion materials. Some ortho and dinitrocomponents are invented by the manufacturer.

• high level of noise insulation;
• the treated surface is inherent tightness;
• "Heals" small flaws;

• high price.

Average price: 1 146 rubles.

Hi Gear - Fast Drying Seam Treatment

The rubber-filled anticorrosive compound has excellent water repellency. After processing the car, a film forms, thanks to which the part does not recognize what rust is. In addition to its anti-corrosion properties, Hi Gear does not allow chemicals and salts that are present on the road surface to destroy the exposed surfaces of the car.

The tool is used for body voids, but seams and joints can also be processed with it. Anticorrosive dries quickly on aprons, sills and wheel arches. The quality of the substance fully justifies the cost. First of all, Hi Gear should be used by owners of new vehicles or used cars, but in good condition.

• contains special corrosion inhibitors;
• possesses not only sound insulation properties, but also heat insulation;
• high elasticity of the film, which does not decrease over time.

• during primary processing, two layers must be applied;
• ineffective for severe surface corrosion.

Average price: 400 rubles.

Noxudol - anticorrosive with excellent sound insulation properties

The products of the Swedish company appeared on the market for a long time and since then they have remained one of the favorites. The manufacturer produces a variety of products for metal parts and vulnerable body parts. Universal anticorrosive suitable for external and hidden parts

It reduces the noise level in the cabin and also protects the underbody and internal cavities from gravel and sand. What to look for when buying is the type of product. Anticorrosive is for individual use and professional, which is usually used at service stations. Since the consistency of the product is very thick, it is better to entrust the application to specialists. Since self-processing will be time consuming and inconvenient.

• manufacturing according to European quality standards;
• with noise insulation effect;
• a large assortment.

• dries for a long time for about three days;
• insulate the electrical wiring before application.

Average price: 710 rubles.

LIQUI MOLY - inexpensive but reliable anticorrosive

If the anti-corrosion agent is chosen in terms of price / quality ratio, you should pay attention to LIOUI MOLY. It is in demand not only in Russia, but also abroad. Anticorrosion prevents rust from attacking the surface, forming an elastic film.

It is better to apply LIOUI MOLY in two layers. The German manufacturer also offers spray, varnish for protecting metal auto parts. The main advantage of the anticorrosive agent is that it prevents the formation of rust.

• excellent adhesion. The tool adheres even to the surface of old cars;
• high level of elasticity;
• the price is reasonable, but the quality is high.

• to obtain the desired effect, the product is applied in two layers;
• is not dirt-repellent and therefore collects a lot of dust.

Average price: 490 rubles.

SUPRA-Shield - a tool for those who want to save

The anticorrosive compound contains corrosion inhibitors and water-displacing agents.Therefore, it can be applied to a wet surface without waiting for it to dry. Cars are processed at any temperature.

In texture, SUPRA-Shield is a liquid anticorrosive, so that it penetrates well into the surface, including formation rust, and stops the process. The reasonable price for 1 liter of protective agent attracts those who first look at how much the anticorrosive product costs, and then only buy

• simple application process;
• reasonable price;
• suitable for processing welded seams.

• strong smell;
• the product drains for a long time from hidden parts of the car.

Average price: 200 rubles.

Cordon - ideal for the bottom

The company produces the product, both aerosol and in the form of mastics with a brush for application. The anticorrosive base is bitumen and synthetic resin. It turns into a black film that is not afraid of sudden changes in temperature and moisture.

You cannot get rid of Cordon after a simple wash or using auto chemicals. The product has soundproofing properties. In terms of quality, it is not inferior to foreign anticorrosive materials for external processing.

• good adhesion;
• prevents corrosion from developing;
• high quality.

• a strong and pungent odor that will disappear only after 10 days;
• it is better to apply at positive temperatures, at negative temperatures the anticorrosive can harden;
• work with the composition carefully. It must not get on the painted parts.

Average price: 300 rubles.

TECTYL - a remedy for difficult conditions

The manufacturer offers bitumen bottom cleaner and wax spray for hidden parts. In Russian conditions, Tectyl body safe with zinc is especially useful.

Thixotropic anticorrosive is sold in cans, but they are more expensive and packaged in cans. To apply the product in the second case, you will need a compressor. Therefore, despite the price, spray cans are more often bought.

• high durability of the coating;
• wide range of products;
• reliability;
• suitable for cold winters.

• applied only to a dry surface;
• high price.

Average price: 1,174 rubles - for a spray, 4,275 rubles for a 5 liter can.

Krown - fast effect anticorrosive

The basis of the product is oil, so it will not harm the paintwork of the car. Anticorrosive also has water-displacing properties that allow it to be applied immediately after washing, without waiting for drying.

The Canadian manufacturer is constantly expanding the range, improving the product. One popular new product, Krown 40, is designed for direct rust treatment. It processes the bottom, wheel arches, hidden cavities.

• practical packing in aerosol cans;
• ease of application to hidden cavities;
• the effect is noticeable after 2 hours.

• not so beneficial for underbody protection;
• when operating machines in harsh climates, the agent is applied once a year.

Average price: 580 rubles.

How to choose a corrosion inhibitor for your car

To avoid mistakes when choosing, you should take into account the condition of the vehicle, the place and method of processing. But it is possible to guarantee effective protection for the body and other parts of the car if the instructions for using the anticorrosive agent have been read and strictly followed.

Car owners who live in regions with a sharp change in temperature should take a closer look at the RunWay line. If rust is already present on the car, you should choose Hi Gear. When you need a reliable and extra-elastic product, you should take a closer look at Movil, rubber mastics. For the luggage compartment, where there is no paint and varnish layer, bitumen-rubber mastics are suitable.

When choosing a tool, it is important to understand that it will not work to find a car anticorrosive solution that will solve all problems at once. You need to select it taking into account the characteristics of the car. That is why there is such a variety of products on sale.

Before buying, you should study the functionality of each, read the review and advice from experienced car owners. On sale there are budget and expensive anticorrosives, with and without noise reduction function in the cabin.