Rating of the best paints for rust for 2020

Over time, any metal surface is exposed to corrosion, which becomes a serious problem for it. Therefore, when the first signs are found, they must be immediately eliminated. This can be done by mechanical cleaning, anti-corrosion treatment, followed by painting. However, such a troublesome business cannot always be completed due to the inaccessibility of some parts for stripping. As a result, to facilitate the process, special materials for rust are used - paints, which, along with solving the problem that have arisen, do not allow it to progress further.

In specialized departments of hardware stores, popular models are exhibited that have a different composition, functionality, capabilities, and also cost. Depending on the needs, everyone independently chooses which product is better to buy.

This review examines the types of rust paints, which are the best manufacturers on the market, how much products and novelties cost, which are the most environmentally friendly, and what to look for when choosing.

General information

Rust paint is a paint and varnish material whose composite composition, evenly applied in thin layers on a metal surface subject to corrosion, forms a protective film with strong adhesion to the base.

At the same time, it becomes more than just a paint over mask for masking rusty areas. This paint performs the functions of a primer without the need to level or clean the surface before coating. It also serves as an excellent material for final painting.

It easily adheres to ferrous or non-ferrous metals, and also evenly covers previously corroded metal surfaces, as well as with the remaining layers of old paints.

Fast drying with the formation of an even dense layer is provided by chemical components:

• alkyd resins;
• polymer additives of low concentration.

Advantages

• direct application to rust with its subsequent transformation;
• anti-corrosion properties with the prevention of reappearance;
• good coverage of the base with a beautiful appearance;
• preservation of the original appearance;
• formation of a reliable moisture-and-dirt-repellent layer;
• excellent adhesion properties providing strong adhesion to the base;
• fast drying;
• wide range of operating temperatures;
• long service life;
• a varied palette with the ability to select any shade.

disadvantages

• inexpediency of processing products heated over 150 degrees;
• the need to protect freshly painted areas from moisture;
• toxicity of certain formulations prohibited for use in residential premises.

Applications

Rust paint is used to treat:

• pipes, batteries, as well as other elements of the heating system, water supply, sewerage

• metal fences or fences

• built-in or stand-alone designs

• gate or lattice

• car bodies

• greenhouses, greenhouses, other metal structures

Types of paints

They are divided according to the base substance.

Acrylic

Durable finishing materials consisting of polymer resins and anti-corrosion modifying substances. They are distinguished by their versatility in indoor or outdoor applications for processing metal products. An elastic, acrylic-based protective film prevents cracking due to environmental influences.

• the formation of a dense inert layer, resistant to sudden changes in temperature;
• the ability to adapt to deformation changes in the metal - compression or tension;
• good adhesive properties;
• does not fade from the action of ultraviolet radiation;
• high thermal stability;
• fire safety;
• without smell;
• lack of toxic compounds;
• the use of various colors;
• long service life;
• easy to clean with tools, can be applied with a spray gun.

• obligatory drying and cleaning of the surface before processing;
• compliance with the recommended parameters of ambient temperature, as well as humidity.

Alkyd

Inexpensive universal products made of synthetic resins, pentaphthalic and glyphthalic varnishes on an alkyd-urethane base, increasing gloss, for processing galvanized metals. Apply in several layers using a spray gun or brush.

• high adhesive properties;
• resistance to aggressive chemical elements or sudden temperature changes;
• protection against mold and mildew;
• ease of application;
• long-term preservation of color saturation;
• insignificant consumption;
• affordable price
• long service life.

• toxicity of the material;
• the need to use personal protective equipment;
• Strong smell;
• highly flammable substance, which does not allow indoor use, as well as on heated structures;
• requirement of preliminary cleaning with degreasing of the treated areas;
• thickens over time.

Oil

Environmentally friendly materials based on vegetable oils and drying oils for indoor use. The use of drying oil ensures the formation of a water-repellent film. After application, it quickly thickens and dries. Suitable for preliminary priming.

Oil paint does not adhere to aluminum or zinc.

• environmental friendliness;
• safety;
• the beauty of the coating;
• lack of a pungent odor;
• low cost.

• low heat resistance;
• exposure to climatic factors with sharp temperature changes, quickly fades under the sun;
• weak anti-corrosion protection;
• after a few years it is necessary to paint again;
• not suitable for long-term use.

Hammerheads

Special materials from synthetic resins, aluminum powder, crushed glass to create a rough surface with a metallic sheen. They can be glossy, semi-matte or matte. They mask roughness or minor imperfections for a noble look.

Apply in several layers for:

• primary primer;
• dense anti-corrosion coating;
• ensuring an even shade.

• quick-drying within two hours;
• non-toxic with no pungent odor;
• long-term preservation of the original appearance;
• large selection of shades;
• does not require preliminary cleaning;
• long service life up to 10 years;
• resistance to mechanical damage.

• not suitable for structures heated to more than 150 degrees;
• the complexity of removal (if necessary);
• high price.

Epoxy

Materials made of silicone polymer resins with additives of hardeners and epoxy-based dyes for the treatment of street metal structures, batteries, tanks and barrels.

• fast drying in 10 hours;
• single layer staining;
• high thermal stability;
• water-repellent properties;
• increased adhesiveness;
• large selection of palette;
• resistance to aggressive media or damage;
• good glossy coating density;
• suitable cost.

• high toxicity.

Anti-corrosion protective solutions

1. Primer with zinc additives as the main protective layer.
2. Paints and enamels applied to a pre-primed surface to create a protective film.
3. Electrolytic solution to enhance adhesion and prevent corrosion.
4. Ceramic coating by plasma, paraphase, flame or enamel coating.

Rubber

Soft materials consisting of water-acrylic components:

• Finnish latex for strength;
• antifreeze to increase stability at low temperatures;
• a coalescent film-forming agent;
• quality pigments, fungicides.

• non-toxic without a pungent odor;
• for use in rooms with high humidity, as well as metal roofs;
• high adhesiveness;
• economical with low consumption;
• the possibility of applying varnish;
• affordable price.

Criterias of choice

When preparing for painting metal structures, the material must be selected taking into account different parameters. Taking into account the following factors will help prevent mistakes when choosing:

1. The type of metal being processed.
2. The presence of climatic factors on the painted surface: humidity, ambient temperature, mechanical damage. If it is necessary to paint heating pipes or radiators, it is necessary to choose a heat-resistant composition that can be operated at temperatures up to 150 degrees. Furnace elements are treated with materials that can withstand temperatures up to 500 degrees.
3. Painting temperature.
4. Corrosion area and propagation rate.
5. The need to use a solvent for dilution.
6. Drying time depending on the place of painting. The value varies from five hours or more, depending on the properties.
7. Painting method - roller, brush, spray or aerosol can.
8. The density of the protective film.
9. Toxicity level with the need to use protective equipment.
10. Planned consumption.
11. The desired color, gloss or dullness are selected according to the interior fit. Gray-black shades are suitable for non-residential premises, and where there are people it is better to choose brighter colors.
12. The choice of which company is better depends on the goal achieved as a result of the painting, as well as the finances. Some have premium materials with high parameters, while others offer budget compositions that do not differ in achievements.

Where can I buy

It is necessary to buy paint for rust in the "Paints and varnishes" (LKM) department of building supermarkets or specialized stores. There you can always get advice and advice from managers to distinguish between polyurethane-based materials and perchlorovinyl-based paints. In this case, the goods can be examined, read the description of how to choose, clarify the features, and also evaluate the appropriate color scheme.

In addition, it is now actively proposed to order a suitable paint online. The popular Yandex.Market aggregator can be of great help, accumulating on its pages the offers of many domestic and foreign manufacturers of high-quality products in the online store.

Rating of the best paints for rust

When compiling the rating, various characteristics of the samples under consideration were taken into account, incl. reviews, place of use, temperature of painting and operation, methods of application, adhesive properties, and many others. However, priority was given to positive feedback, product quality versus value, and the popularity of the models in customer opinion.

TOP 3 best rust paints for outdoor use

Teknos ferrex

The rating of quality paintwork materials opens up a universal material for processing aluminum and steel products. Possesses adhesive properties on galvanized (galvanized) surfaces, as well as areas treated with shop primers.

It is used for priming metal products operating under heavy load under negative weather conditions, incl. for surface or underwater parts of boats.

The composition contains additives against mildew.

Specifications:

Parameter	Value
Dry residue	up to 43%
Coating	matt
Density, g / ml	1.25
Drying time, h	3-6
Consumption, sq.m / l	10
Diluent	Teknosolv 1621
Work tool	spray, brush, roller, sponge
Packaging, l	1,0; 3,0; 10,0
price, rub.	1200; 3540; 10340
Brand name	Teknos
Manufacturer country	Finland

• resistance against negative atmospheric influences;
• high dry residue;
• the possibility of processing galvanized or aluminum surfaces;
• painting on tightly adhering rust;
• antifungal properties;
• can be used as a finishing agent.

• high price.

DuLux Master 90

Universal paint for application to metal structures. Provides the creation of a weather-resistant elastic coating that is resistant to sudden changes in temperature and humidity. Possesses water-dirt-repellent and adhesive properties with resistance to prolonged temperature exposure up to +90 degrees.

When repairing, it is applied with a brush or roller in two layers at a temperature of 5-30 degrees and a humidity of 40-80%.

Specifications:

Parameter	Value
Coating	glossy
Drying time, h	12 - the first layer; 16-24 - full
Consumption, sq.m / l	8-12
Diluent	White Spirit
Work tool	brush, roller
Packaging, l	0,9; 1,0; 2,5; 10
price, rub.	850; 1160; 2550; 9650
Brand name	Dulux, AkzoNobel
Manufacturer country	Netherlands

• quick-drying;
• does not leave streaks;
• no splashing;
• ease of painting.

• inadmissibility of work at negative temperatures;
• it takes effort to launder.

Neomid master good

Ready-to-use highly elastic material for the treatment of galvanized and aluminum surfaces, as well as ferrous metal structures. During construction, you can paint roofs, drainage systems. Resistant to the negative effects of climatic conditions (ultraviolet, precipitation) with good water resistance. Has a high degree of elasticity, does not crack. Construction paint is applied in two layers.

Long service life up to 10 years.

Specifications:

Parameter	Value
Coating	rubber
Drying time, h	3-4
Consumption, sq.m / l	7-10
Diluent	water
Work tool	spray, brush, roller
Packing, l	2,4; 14,0
price, rub.	850; 3990
Brand name	MasterGood
Manufacturer country	Russia

• pleasant to the sensation;
• easy to clean;
• attractive price;
• fast drying.

• prolonged contact with water is not allowed.

TOP-3 best paints for rust "Z in 1"

Husky klondike

The material of a domestic manufacturer is applied to metal structures inside and outside. Treatment of the corroded surface is carried out after removing loose rust. Thanks to the components included in the composition, corrosion is transformed into a reliable protective layer, its further development is inhibited, and a weather-resistant film is formed. If the instructions are followed, the metal is protected for up to eight years.

Specifications:

Parameter	Value
Coating	glossy, semi-matte
The basis	alkyd
Colour	26 colors
Drying time, h	4-6
Consumption, sq.m / l	10
Diluent	orthoxylene
Work tool	spray, brush, roller
Packaging, l	0, 25; 0,9;2,5
price, rub.	243; 559; 1469
Brand name	Descartes (Russia)
Manufacturer country	Russia

• good covering ability;
• high adhesive properties against rusty metal;
• creates a smooth surface or hammer effect;
• dries quickly;
• tinting according to the MONICLOR, Spirit, RAL, NCS catalogs.

• Strong smell;
• the need for ventilation when working indoors.

Tikkurila Metallista

A special weatherproof material that combines a rust converter, anti-corrosion primer and decorative topcoat. Provides easy painting of cast iron and steel areas without additional use of a primer. The presence of wax prevents moisture penetration. Allowed for use in preschool or medical institutions.

Tikkurila computer tinting is available.

Specifications:

Parameter	Value
Dry residue	up to 60%
Coating	glossy
Colour	by catalog
Drying time, h	6-10
Consumption, sq.m / l	10-13
Diluent	white spirit 1050
Work tool	spray, brush, roller
Packaging, l	0, 4; 0,9;2,5
price, rub.	348; 729; 1890
Brand name	Tikkurila
Manufacturer country	Finland

• weather resistance;
• excellent wear resistance;
• double formula;
• prevents the spread of corrosion;
• applied directly to rust;
• withstands the effects of turpentine, white spirit, fats, oils, as well as thick lubricants.

• highly flammable material;
• it is forbidden to inhale vapors;
• the largest capacity is 2.5 liters;
• thoroughly ventilate the room;
• high price.

KrasByt Antikorro-Plus

Fast-drying all-season anti-corrosion material of Russian production with the addition of components that convert rust. It has high protective and decorative properties. It is used for painting ferrous and non-ferrous metals directly on rust. Provides protection of reinforced concrete products from harmful atmospheric factors and corrosion.

Specifications:

Parameter	Value
The basis	acryl silicone
Coating	matt
Colour	RAL tinting
Application temperature, degrees	-15-+60
Drying time, h	3
Consumption, kg / sq.m	0,1-0,3
Diluent	butyl acetate
Work tool	spray, brush, roller
Packing, kg	25
price, rub.	6380
Brand name	Krasbyt
Manufacturer country	Russia

• fast drying;
• good weather resistance;
• high thermal stability;
• simple application;
• neutralizes the corrosion process;
• long service life.

• mandatory thorough ventilation of the place of work;
• the need for personal protective equipment;
• highly flammable, must be protected from fire.

TOP 3 best paints for hammer rust

Dali hammer

Domestic products for processing cast iron, steel, non-ferrous or galvanized surfaces directly on metal and rust. Provides a hammer effect. With the function of converting corrosion, primer, also decorative enamel. It has a three-stage protection system - barrier, anti-corrosion, tread.

Specifications:

Parameter	Value
The basis	alkyd
Coating	glossy
Colour	9 basic
Application temperature, degrees	from +8
Drying time, h	to touch - 2; final - up to 7 days
Consumption, sq.m / l	12-18
Diluent	Dali, solvent, xylene
Work tool	spray, brush, roller
Packing, kg	0,23; 0,75; 2,0; 10,0
price, rub.	277; 630; 1480; 6800
Brand name	Dali (Russia)
Manufacturer country	Russia

• high adhesive properties to rusty surfaces;
• direct application to rust with the effect of the "3 in 1" formula;
• durable layer with the effect of hand hammering;
• water resistance;
• resistance to oils, weak alkalis and acids;
• on an alkyd base is not affected by ultraviolet radiation;
• weatherproof to sudden changes in temperature;
• excellent covering ability;
• low consumption;
• affordable price.

• the need for painting in several layers with the obligatory drying of each.

More information about paint - in the video:

Panzer for metal hammer

Material for protective and decorative processing of reinforced concrete and metal products indoors and outdoors. The coating has excellent adhesion to rusty surfaces. Has the best physical and mechanical properties - impact resistance, weather resistance, wear resistance. It is applied to areas previously cleaned from loose corrosion.

In case of painting on galvanized areas, additional primer is required.

Specifications:

Parameter	Value
The basis	alkyd
Coating	glossy
Colour	tinting according to the catalog
Application temperature, degrees	+5-+30
Drying time, h	6
Consumption, sq.m / l	8
Diluent	White Spirit
Work tool	spray, brush, roller
Packing, kg	0,25; 0,75; 2,3
price, rub.	290; 630; 1560
Brand name	Panzer
Manufacturer country	Serbia

• painting directly on rust using the "3 in 1" method;
• convenient packaging;
• beautiful appearance;
• excellent covering ability;
• good value for money.

• Strong smell.

Hammerite with hammer effect

Material with the use of DualTech technology of a recognized international leader in the production of paints and varnishes from the Netherlands. Provides an interesting decorative effect of "embossing", concealment of irregularities and masking on tinted areas in case of damage. Aluminum flakes in the composition create a peculiar pattern, and specific silicones with the addition of wax give a water-repellent effect. They are used for anti-corrosion protection and finishing of metal gates, fences, grilles, and furniture.

Specifications:

Parameter	Value
The basis	alkyd
Coating	glossy, semi-matte
Colour	12 basic
Painting temperature, degrees	+15-+30
Drying time, h	4
Consumption, sq.m / l	10
Diluent	Hammerite
Work tool	spray, brush, roller
Packing, kg	0,25; 05; 0,75; 2,2; 2,5; 5,0; 20,0
price, rub.	466; 702; 1050; 2550; 2950; 16730
Brand name	Hammerite, AkzoNobel (Netherlands)

• direct application to rust;
• unique formula "3 in 1";
• reliable anti-corrosion protection up to 12 years;
• weather-resistant layer with water and dirt-repellent properties;
• fast drying;
• excellent covering ability;
• good adhesion to corrosive areas.

• not suitable for metal products in an aqueous environment;
• high price;
• need a proprietary Hammerite solvent.

More information about painting with this composition is in the video:

TOP-3 best rust paints for cars

Novbytkhim primer-enamel

Material for treating clean or corroded surfaces. It is characterized by fast drying. Apply directly to rusted areas. The properties of the transformation of corrosion, primer and decorative enamel are combined. The presence of anti-corrosion pigments prevents the development of corrosion.

Specifications:

Parameter	Value
The basis	alkyd
Coating	matt
Colour	12
Application temperature, degrees	from +5
Drying time, h	6
Consumption, sq.m / l	10
Diluent	solvent No. 1, xylene, R-4, R-5
Work tool	spray, brush, roller
Packing, kg	0,4; 1,0; 3,0; 20,0
price, rub.	155; 295; 855; 5600
Brand name	Novbytkhim
Manufacturer country	Russia

• dries quickly;
• high weather resistance and non-susceptibility to sudden changes in temperature;
• resistance to salt water and mineral oils;
• elasticity;
• adhesive properties to metal;
• excellent covering ability;
• the ability to work at negative temperatures up to -10 degrees;
• good value for money.

• Strong smell;
• is naughty when using a solvent.

Video tutorial on working with paint:

Vixen priming enamel for rust

Aerosol composition for processing metal, glass, stone and wood surfaces. Fits securely on corroded structures preventing further spread. After painting, the appearance of the product is updated.

Specifications:

Parameter	Value
Coating	semi-matte
Colour	9 according to RAL standard
Painting temperature, degrees	+5-+30
Drying time, h	7
Consumption, sq.m / piece	2,5-4,5
Work tool	aerosol can
Volume, ml	520
By price, rub.	196
Brand name	Vixen
Manufacturer country	Russia

• convenient application;
• good covering ability;
• fast drying;
• fine spray;
• profitability;
• low cost.

• Strong smell;
• toxicity;
• there are questions about economy and consumption.

Kudo Rust Hammer

Aerosol composition for processing metal surfaces according to the "3 in 1" formula. Combines the properties of a corrosion neutralizer, primer and decorative enamel.

Specifications:

Parameter	Value
The basis	alkyd
Coating	matt
Colour	15 according to RAL standard
Painting temperature, degrees	not lower than +10
Drying time, h	at least 2
Consumption, sq.m / piece	1,0-2,0
Work tool	aerosol can
Volume, ml	520
Average price, rub.	241
Brand name	Kudo
Manufacturer country	Russia

• even application to hard-to-reach areas;
• fast drying;
• without a pungent smell.

• wide spread of aerosol jet.

More information on this paint - in the video:

Conclusion

Thus, a correctly chosen material for painting rusty metal structures will not only renew the look, but also protect against the negative effects of external climatic factors. As a result, the renewed coating will increase the service life, and further development of corrosion will be stopped and stopped.

Enjoy the shopping!