Content

  1. Brief information
  2. Criterias of choice
  3. Top loader crane manufacturers
  4. Output

Rating of the best manufacturers of loader cranes for 2020

Rating of the best manufacturers of loader cranes for 2020
  • Posted by: Auto and Moto
  • Views count: 1211
  • Reading time: 6 minutes.

The modern construction market is filled with a huge amount of a wide variety of equipment that makes any work easier. This type of equipment includes a crane-manipulator - a machine that makes an invaluable contribution to the construction process. Such equipment has a rather complex design, differs in functionality, dimensions and power. All details regarding the successful selection, as well as the best crane manufacturers, are below.

Brief information

The loader crane is a cross between a conventional automatic crane and a truck. Thanks to this technique, the most complex assembly, construction and earthworks are carried out.

It is worth noting that any loader crane is considered an expensive pleasure, since its complex design, as well as further operation, involves a lot of financial costs. As a rule, professional machinists are hired to operate such equipment. If the loader crane has sufficient power and a specially trained person is driving, then the described machine can perform the following tasks:

  1. Lift construction workers to great heights. In this case, there must be a special stand at the construction site or work area.
  2. Install various structures and glass units. For the latter option, you need to get a vacuum suction cup.
  3. Lift heavy loads to a height.
  4. Drill water wells with auger drills.
  5. Transport construction materials of almost any weight.
  6. Load and unload heavy equipment, building materials and household waste.

Criterias of choice

In order to successfully choose a loader crane, it is necessary to carefully study its functionality, technical characteristics and design features. However, first of all, the following rules should be observed:

  1. When buying, you need to pay attention to the turning angle. This characteristic provides mobility and mobility during construction work. It is worth noting that some manufacturers produce models with an unlimited angle. However, these machines are quite unpredictable, especially when it comes to an area with poor stability. When operating a crane in such a place, you need to beware of uncontrolled rotation of the boom, because unstable zones create large load drops.
  2. When buying, you need to make sure that there is sufficient boom out of the car body - the indicator should be at least one meter. Of course, such a technique will not be able to lift a heavy load, since for this task you will need a machine, the boom of which reaches 5-6 meters. There are models with boom lengths up to 8 meters. This technique is capable of lifting loads weighing over 30 tons.
  3. Ultimately, functionality plays an important role. Also, you should definitely choose the crane that will not perform the assigned task with a creak and overload. Otherwise, the CMU will serve for a rather short time.If the job involves lifting heavy loads, then it is necessary to purchase equipment that will lift heavy objects using 75-80% of the total capacity.

Having dealt with the basic rules for choosing a crane, you need to get acquainted with the design features that will ensure the successful implementation of the work.

Chassis

Considering the design of the crane-manipulator, it becomes clear that this equipment can be installed on any construction machine. However, in such cases on a construction site, the machine will operate with minimal maneuverability and stability. To avoid undesirable consequences, it is better to get a special tractor or flatbed truck. The cost of this hybrid will be higher, but high productivity and heavy lifting are guaranteed.

The first thing to do is to study the carrying capacity of the machine. Loader cranes that will lift, for example, 10-15 tons are not recommended to be installed on light trucks. Otherwise, the lifting equipment will simply tip over. The described factor also has the other side of the coin - you should not take heavy load-lifting chassis if the work involves transporting or lifting household appliances.

Arrow

It is necessary to pay attention to the boom based on what types of work will be carried out. Any modern crane-manipulator has a face value of 2-8 units. Naturally, the more edges there are in the boom, the more the machine can lift, and the more expensive it will be. Accordingly, for greater reliability and power, an 8-sided crane would be an ideal option, and a 2-sided crane for lifting small weights.

Winch

Those loader cranes that have a built-in winch have a huge number of advantages over conventional CMUs. First of all, it is worth noting the manual reduction in the rate of weight landing. This function is simply necessary in those cases when work is carried out with fragile materials.

How long the winch cable will be depends on the type of work. If any load will be lowered into a deep hole, then a long rope will be needed for successful carrying. However, the cost of this element will be too high, so before buying you need to carefully consider the nature of future work.

Top loader crane manufacturers

For the current year, there are over 40 manufacturers of CMU around the world, the overwhelming majority of which belong to the domestic market. However, not every manufacturer can offer a truly worthy option with an optimal price-quality ratio. Below is a list of the best manufacturers of equipment used around the world.

Grove

The American company Grove began its existence back in 1947, so this manufacturer can be safely considered one of the oldest. At the moment, the organization's construction equipment is in great demand around the globe. The first lifting equipment was developed by 1950, and after 44, the company was already in full production of multifunctional equipment for construction work, in connection with which it received an international quality certificate.

The assortment of the organization includes a wide variety of hydraulic and mobile cranes, the length of which is up to 60 meters, the lifting height is up to 120 meters, and the lifting capacity is up to 400 tons. Considering the technical characteristics of the cranes, we can safely say that Groove is not in vain one of the first places in the world market. The loader cranes of the American company are regularly used on huge construction sites for the construction of skyscrapers. It is also worth noting that the organization is engaged in the production of cranes for the military industry. As of the present, Groove has partnered with Mercedes-Benz to build truck cranes.

During the production of loader cranes, innovative technological processes are used.For example, one of the advantages of the equipment can be called the independent Megatrak lighting, which goes together with the leading chassis, provides maximum cross-country ability and enhances the stability of the boom during transportation, as well as the work process. Also noteworthy is the Twinlock locking system, which achieves high productivity, lifting capacities and enormous boom reach. The hydraulic system Hydraulic and Les is responsible for changing the angle in the loaded state, which provides a rotation from 5 to 50 degrees. Thanks to this approach, the loader crane quickly copes with the assigned tasks.

The ECOS electronic unit acts as a control link, which not only makes turns more convenient, but also allows you to collect all the necessary data regarding the operating parameters of the boom. The wide viewing angle of the cab (50 degrees) is provided by the hydraulic tilt system Hydraulic Cab.

Advantages:
  • High performance of cranes;
  • Reliability and durability;
  • Use of innovative technological processes;
  • A wide range of lifting equipment.
Disadvantages:
  • Not found.

KATO

Another ancient manufacturer of lifting equipment began its existence back in 1895. Since then, the Japanese company has been manufacturing all types of construction equipment, and therefore occupies one of the leading places around the world. 1940 was a significant year for the organization, because from that moment its own production of cargo wheeled and tracked vehicles began. Subsequently, this ensured the creation of full-fledged loader cranes, without the use of third-party equipment.

Towards the end of the 1960s, the company was engaged in the production of series production truck cranes, as well as drainage and cleaning equipment. KATO hydraulic lifting machines were mass-produced in the early 1970s and soon gained widespread acceptance in the international market. Particular attention should be paid to the Jumbo NK 750 model, which is considered the largest mobile crane in the world. The rest of the range of the organization includes all-terrain cranes, cranes for urban use and excavators.

The booms of KATO loader cranes have a length of 4 to 6 meters. Thanks to this, Japanese technology is regularly used on large construction sites. The lifting capacity of this equipment is up to 20 tons. The main advantages of these loader cranes are their high maneuverability and compactness. The machines are easy to transport in urban and residential environments.

Advantages:
  • High quality products;
  • Compactness and maneuverability of cranes;
  • World renown of the company.
Disadvantages:
  • Slow lifting speed.

LIEBHERR

One of the largest manufacturers of ground and underground equipment has its own production points in more than 10 countries of the world on 3 continents. When it comes to construction equipment manufacturing, LIEBHERR boasts the most diverse assortment of any other organization on this list. The production sites produce concrete mixing plants, pipe layers, automatic concrete mixers, wheel loaders, track loaders and bulldozers, hydraulic excavators, dump trucks, hydraulic cranes, mobile cranes, tower cranes and loader cranes.

The high quality of LIEBHERR products is due to the use of proprietary technologies. Absolutely all important elements of construction equipment are manufactured directly in the company itself. For example, control systems for cranes and trucks, drive technology, transmission, electrical and electronics, engine and hydraulic systems. The production sites are engaged in the manufacture of such small parts, such as bearings, hydraulic cylinders, that other popular companies turn to LIEBHERR for help.

Advantages:
  • Huge assortment of construction equipment;
  • Using our own technologies, without the intervention of third-party companies;
  • Reliable and versatile equipment.
Disadvantages:
  • Most models do not have a slowdown in descent speed.

HIAB

Since 1947, the Swedish company HIAB has been developing loader cranes for heavy machines. As of the present, in 2019 the concern has produced about 15,000 units of manipulator lifting mechanisms. A distinctive feature of this construction equipment is considered to be high precision and quality of assembly. The outreach of the longest boom of the crane is 8 meters, thanks to which the equipment is able to lift the load to a height of 32 meters.

The latest models of the Swedish concern (XS 622-625) are equipped with an advanced control system. Upgraded hydraulic elements ensure smooth lifting and landing of the load. The load moment of the described equipment is 75 Tm. Modern models are equipped with advanced electronics, which are responsible for the automatic boom extension. The only drawback is the slow movement speed of the boom.

Advantages:
  • Powerful and efficient equipment;
  • The presence of an improved control system in the latest models;
  • The boom length of the best model is 8 meters.
Disadvantages:
  • Low speed of movement of an arrow.

HMF

The Danish construction equipment manufacturer Hojbjerg Maskinfarik A / SHMF has been operating since 1954. The company's equipment is reliable and simple in design. A distinctive feature is the use of its own technologies, which were developed by the engineer and part-time founder of the organization, Arne Jensen. The range of the concern is not as great as it is more diverse. For example, on the international market, you can find miniature versions of HMF-50 loader cranes, as well as ODIN and THOR heavyweights capable of lifting 28-30 tons.

Most models are equipped with a smooth boom system, making the equipment ideal for handling delicate materials. Also remarkable is the intelligent control system, which is characterized by the automation of its own production. The described unit is responsible for extending the boom with a heavy load, therefore, in an emergency, the system will automatically stop the work process.

Advantages:
  • Reliability and durability of equipment;
  • Variety of lifting cranes;
  • Precision and high build quality;
  • The presence of an intelligent control system.
Disadvantages:
  • Not found.

Output

The best manufacturers of loader cranes are predominantly foreign companies. If your financial situation allows you to purchase reliable and high-quality equipment, then you should give preference to Japanese and German products. Also, when choosing construction equipment, you need to take into account the design features, characteristics and functionality.

This rating is not advertising in nature and is compiled for informational purposes only. Always consult a professional before purchasing construction equipment.

Computers

Sport

beauty