Content

  1. Meaning of the word
  2. What are
  3. How to make a choice
  4. Installation
  5. Rating of the best siphons for 2020
  6. Output

Rating of the best siphons for 2020

Rating of the best siphons for 2020

Siphons are an important component of the plumbing system of residential buildings, which protects against unpleasant odors, eliminates the risk of leakage (bathroom, kitchen flood). Studying the rating of the best siphons for 2020, you can choose the right model in terms of functionality, quality, price.

Meaning of the word

The word "siphon" from the Greek - a tube, a pump. Has several different meanings ("Explanatory Dictionary of the Russian Language" by Ushakov):

  1. Curved tube for pouring fluid into vessels with different fluid levels.
  2. Sink drain, odor control water valve.
  3. A vessel for carbonated, mineral water (seltzer, soda water).
  4. Organ of mollusks (helps with movement, breathing, reproduction).
  5. Flamethrower gun (installed on ships).

The most common explanation is a plumbing fixture that is used in every home.

What are

Siphons are used in different rooms - kitchen, bathroom, shower. They differ in structure, material, additional functions (overlapping drainage water).

Structure, principle of operation

Different types have a similar structure of the main parts.

A set of universal look consists of:

  • inlet, outlet branch pipe (hose sections);
  • body;
  • drain, metal grate (cells - 7-10 mm);
  • sewer branches;
  • connecting screws, nuts;
  • seals (sealing joints).

Principle of operation: connected on one side - drain (sink, bath), the other side - sewerage system. Used water (washing hands, dishes) flows into a siphon, pipe, sewer. The body (bent part of the pipe, flask) contains a small volume of water, which serves as a water seal, does not allow odors from the sewer system.

Other models (dry seal) use a membrane, a float instead of a liquid.

By structure, there are 4 types of products:

  1. Corrugated.
  2. Bottled.
  3. Pipe.
  4. Flat.

Corrugated

They are made of plastic folded (corrugated) pipe, which bends at the desired angle, an angle is formed - a water seal. The bend is fixed with adhesive tape (scotch tape), a special plastic clamp. The rest of the pipe can be adjusted. The budget option, suitable for non-standard sinks, requires a small space, installation, and is easy to assemble.

Cons - deformed from high (boiling water), low (unheated room in winter) temperatures, difficult to clean (the whole system must be completely disassembled), quickly become dirty (fat deposits are deposited on the walls).

Bottle (flask)

They are distinguished by a rigid system, a vertical vessel (flask), where water is constantly located. All waste, accidentally washed away small objects (chains, rings) are collected in the lower part of the bottle (flask), which is easy to disassemble and clean. Some models have an overflow function - water level control.

Pipe

They consist of a rigid bent pipe (U (S) -shaped). There are collapsible, non-collapsible models. A collapsible system - several sections that are connected in stages. The exact dimensions of the sink drain, the openings of the sewer system are important for pipe structures. The curved part where the liquid is located is the water seal.

Difficult cleaning - in models without removable parts. If you do not use the water supply for a long time, unpleasant odors from the sewer system may appear (the water from the water seal evaporates).

Flat (ladders)

Installed in places with limited space - shower cabins with low trays, sinks above the washing machine, jacuzzi baths, hanging sinks. They are small in size. Material - plastic, metal. Cleaning - complete dismantling of the system.

For air conditioners

Special siphons of air conditioners are installed when there are prohibitions on the installation of split systems with condensate discharge to the street. The principle of operation is the removal of liquid into the sewage system. There are three types of structures:

  1. Model with a water seal - the pipes (inlet, outlet pipe) are connected by a U-shaped elbow, which is a water seal for odors. Has a large size, with inconsistent use - evaporation of liquid, the appearance of odors.
  2. Ball siphon - the closing valve (ball) rises, allows liquid (water pressure) to pass through. Closes part of the hose when the amount of condensate decreases.
  3. Drainage type - plastic box, replaceable cassette (ball device). Wall-mounted with transparent front panel (replacement of dirty cassette).

Distinguish by the output of liquid (condensate):

  • horizontal outlet;
  • vertical outlet;
  • combined type - 2 types of output (horizontal, vertical).

Dry siphon

The principle of operation is the "nipple" system (an internal special membrane is a check valve). Consists of: polymer pipe (polypropylene), membrane, thread at the ends. Advantages of a dry seal:

  • durability;
  • recommended for rooms that are not heated, are not used for a long time;
  • can be installed horizontally, vertically (water seals - only vertically);
  • high noise insulation;
  • take up little space;
  • water does not stagnate;
  • not recommended for kitchen sinks - it quickly breaks down.

Dry seal types

Dry locks differ in place of application, size, design. Allocate:

  1. Membrane - the membrane (valve) is compressed under the pressure of water, passes the flow of liquid, without pressure, the membrane closes the lumen.
  2. Pendulum - the valve is fixed in one place, the pressure changes the position of the valve.
  3. Float - combined model (water, dry seal), valve - float. When there is water - it keeps afloat, there is no water - it goes down, blocks the drain.

The novelties are products with molecular memory of materials from which the device is made. They are distinguished by quality, the ability to reliably seal the drain, and high cost.

Material

Metal

They are distinguished by their durability, spectacular appearance, but they require precise adjustment to the desired dimensions (it is difficult to adjust the length), careful use of detergents. Metal products are used:

  • brass - an alloy of copper, zinc, tin, lead, nickel. Differs in high resistance to mechanical damage, corrosion;
  • non-ferrous metals (bronze, copper) - beautiful appearance, heavy maintenance, selection of special products (the surface is easily scratched, oxidized);
  • cast iron - only cast iron baths, are large, heavy, need accurate installation by specialists.

Plastic

They use PVC, polyethylene, polypropylene. The plastic parts of the structures are plastic - they take the desired shape, the length is easily adjustable. Polypropylene parts are distinguished by a long service life (10-15 years), resistance to high temperatures, and strength.

Drain mechanism

An important selection criterion is considered to be the drain control. There are three mechanisms:

  • classic - the drain is closed with a stopper;
  • semi-automatic (baths, shower cabins) - adjustment by turning the lid (the cable is connected to the valve);
  • automatic - pressing the built-in plug (“click-clack”).

How to make a choice

Before buying, you should find out the range of stores, pricing policy, choose a product using customer reviews (online store sites), listen to expert advice (YouTube videos).

The main steps for selecting the right model:

  • selection of the type of siphon (location - kitchen, shower, bathroom sink);
  • choose product material;
  • determine the need for additional functions - double outlet, overflow, drain mechanism;
  • measure the diameters of the drain, sewer (standard - 35, 40, 50 mm) holes;
  • examine the complete set - all the necessary components, the absence of defective parts;
  • color, quality of gaskets (black, white)
  • material of fasteners (bolts, stainless steel nuts)
  • throughput (several objects - an increase in the section of the pipe, several sewer outlets);
  • cost, manufacturer, guarantee, quality certificate.

Installation

Universal models are distinguished by easy installation, which can be done with your own hands with minimal knowledge. Specialists should be involved when installing pipe metal models that require careful selection of the dimensions of the joints.

Do-it-yourself installation should be started by studying the instructions.

Required tools: screwdriver, knife, sealant, pliers.

  1. First, you need to clean the sewer pipe, install the adapter, rubber gasket.
  2. Dismantle the old product - unscrew the screw on the grill.
  3. Clean the drain point from fat deposits, rust.
  4. Review the assembly instructions for the new product.
  5. Install, screw the part of the product with the grill.
  6. Connect the siphon to the hose under the sink.
  7. Connect the device to the sewer hole.
  8. Hose position - unobstructed drainage of water.
  9. The housing installation level is above the level of the sewer pipe.
  10. Spill water through the system - fix leaks.

Rating of the best siphons for 2020

The review of high-quality models was compiled according to the reviews of buyers of well-known online stores. You can order a suitable view online, connect it yourself in a short time.

For sink

The bottle type is suitable for the kitchen - it takes up space under the sink, it is easy to clean from large blockages, fatty deposits. Bathroom sink - selection by decor (brass models), if there is a washing machine nearby - option with an additional drain.

Unicorn IS. 110312

Manufacturer - Unicorn (Russia). Bottle design. Connection diameter - 4 cm, 1 ½ ". Material - white plastic, stainless steel.

Unicorn IS. 110312
Advantages:
  • universal size;
  • cost.
Disadvantages:
  • low noise insulation;
  • thin plastic.

McALPINE MRSK4

Manufacturer - McALPINE (Scotland). Material - white plastic. Type - pipe (knee). Connection diameter: 50, 40 mm.

McALPINE MRSK4
Advantages:
  • good quality plastic;
  • the term of use is 3600 days.
Disadvantages:
  • not identified.

Viega 5755 366 681

Manufactured by Viega (Germany). Bottle design. Material - silver-colored brass. Composed:

  • drain hose;
  • siphon;
  • lattice, cork.

Connection diameter - 32. Distance from the wall - 25 cm, height (maximum, minimum) - 180, 130 mm.

Viega 5755 366 681
Advantages:
  • there is an adjustment;
  • easy installation;
  • beautiful appearance.
Disadvantages:
  • cost.

VIRPlast Mini Elite 30980676

Manufacturer - VIRPlast (Poland). Consists of - corrugated hose, grill, water seal. Material - white plastic, stainless steel. Connection diameter - 50, 40, 1 ½ ".

VIRPlast Mini Elite 30980676
Advantages:
  • one size fits most models of sinks;
  • adjustment;
  • cost.
Disadvantages:
  • smell of plastic at the beginning of use.

WIRQUIN Minor 30718050

Manufacturer - WIRQUIN (France). Bottle type siphon. Material - stainless steel, white plastic. The kit consists of: corrugated hose, grille, siphon, steam pipes.

Connection diameter - 40 mm, 1 ¼ ". Height (minimum, maximum) - 55, 150 mm.

WIRQUIN Minor 30718050
Advantages:
  • can be adjusted;
  • cost.
Disadvantages:
  • not identified.

For shower

Recommended compact type - ladders (5-6 cm), which are mounted in the floor screed. Convenient automatic drain control mechanism.

GEBERIT CleanLine 154.152.00.1

Manufactured by GEBERIT (Switzerland). Construction - ladder. Material - gray plastic. Shutter type - dry. Dimensions (mm):

  • width - 28;
  • height - 20.5;
  • length - 35.8;
  • weight - 0.89 kg.

Recommended for shower cabins without a tray (floor drainage). The minimum screed height is 65 mm.

GEBERIT CleanLine 154.152.00.1
Advantages:
  • compact size;
  • dry shutter;
  • the warranty period is 10 years.
Disadvantages:
  • price.

Viega Advantix Vario 4965.21 704 360

Produced by Viega (Germany). Construction - tray. Material - stainless steel, plastic, chrome plated. The kit consists of:

  1. Siphon.
  2. Tray.
  3. Legs.
  4. Decorative overlay.

Connection diameter - 50, 40 mm. Height (minimum, maximum) - 9.5, 16.5 cm. Length - 120 cm, width - 11 cm.

Viega Advantix Vario 4965.21 704 360
Advantages:
  • the ability to adjust;
  • compact size.
Disadvantages:
  • high price.

Aniplast 50mm drain 40mm

Manufactured by ANI PLAST (Russia). Construction - ladder. Material - white polypropylene, ABS plastic (neck cover). The diameter of the drain hole is 5 cm. The set consists of: wrench, flexible hose. Hose parameters - 375x40x50. Weight - 0.280 kg.

Installation - shower tray.

Aniplast 50mm drain 40mm
Advantages:
  • convenient cleaning through the neck;
  • there is a flexible hose, a wrench;
  • price.
Disadvantages:
  • not identified.

Viega Tempoplex 6956EX 364 786

Produced by Viega (Germany). The species is tubular. The diameter of the outlet to the sewer is 50 mm. Drain hole - 9 cm. Complete set:

  1. 45⁰ abduction bend.
  2. Drain hole cover.
  3. Removable device (protection against unpleasant sewage odors).

Weight - 0.38 kg.

Viega Tempoplex 6956EX 364 786
Advantages:
  • easy installation;
  • the possibility of cleaning.
Disadvantages:
  • price.

Tim BAD011502

Manufacturer - TIM (USA). Construction - floor ladder. Material - stainless steel. Set: ladder, grate, odor trap. Connection diameter 50 mm. Dimensions (mm): height 67, width 150, length 150. Water flow rate 30 l / min. Outlet - horizontal.

Tim BAD011502
Advantages:
  • the presence of a water seal - water does not stagnate;
  • 3 year warranty;
  • cost.
Disadvantages:
  • careful use of abrasive detergents.

For Bath

A mandatory feature is a double drain-overflow system.

AlcaPLAST A501

Manufactured by AlcaPLAST (Czech Republic). Siphon design: pipe (knee). Material - white plastic (polypropylene), stainless steel (chrome plated). The set additionally contains a grate, plug, drain and overflow, corrugated hose.

Connection diameter - 50 mm. Length - 57 cm, height - 12 cm. Overflow rate - 43 l / min.

Product weight - 394 g.

AlcaPLAST A501
Advantages:
  • warranty - 3 years;
  • cost.
Disadvantages:
  • low noise insulation.

GEBERIT 150.520.21.1

GEBERIT (Switzerland). Design - drain and overflow. Material - brass, plastic. Connection diameter - 50, 52 mm. Length - 65.7 cm, height - 28.5 cm.Drainage capacity - 0.85 l / s.

GEBERIT 150.520.21.1
Advantages:
  • easy installation;
  • fast, quiet water drain;
  • warranty - 10 years.
Disadvantages:
  • cost.

Viega 6387.35 311 537

Manufacturer - Viega (Germany). Material - plastic, stainless steel. Bath drain hole diameter: 52. Drain elbow 45⁰.

Equipment:

  1. Flexible overflow pipe.
  2. Cover (stainless steel).
  3. Cork, chain.
  4. Water seal.
Viega 6387.35 311 537
Advantages:
  • easy assembly, installation;
  • good quality plastic;
  • lack of corrugated parts;
  • low height - 10 cm;
  • cost.
Disadvantages:
  • no seals.

ANI Plast E155

Manufacturer - ANI Plast (Russia). Siphon design: pipe (knee). Height (minimum, maximum) - 22, 37.5 mm. Flexible pipe - 40 × 50. Drain hole - 40 mm. Material - white, blue (cork, connections) plastic, steel (overflow, neck). Dimensions -140x250x74 mm. Equipment:

  1. Siphon.
  2. Release.
  3. Drain and overflow.
  4. Cork, chain.
  5. Corrugated pipe.
  6. Lattice.
ANI Plast E155
Advantages:
  • sizes can be adjusted;
  • price.
Disadvantages:
  • corrugated elements.

AlcaPLAST A55K

Brand "AlcaPLAST" (Czech Republic). Design - pipe (knee). Connection diameter - 50 mm. Height 37 cm, Weight -783 g. The kit additionally contains a set for installation, drain and overflow, decorative cover. Material - white polypropylene, stainless steel. Semi-automatic drain-overflow (cable).

AlcaPLAST A55K
Advantages:
  • warranty - 2 years;
  • easy installation;
  • beautiful design;
  • monolithic drain seal;
  • adapter.
Disadvantages:
  • not identified.

Output

Having studied the features of different models of siphons, selection tips, you can quickly find a suitable model. The correct choice of product will help get rid of unpleasant odors, enjoy water treatments.

Computers

Sport

beauty